Panasonic RX-DS17 - Compact Disc Program Play; Programming Tracks; Checking Programmed Tracks; Program Memory Retention

Track number
Specified track number
Hei Pit
Play time
Program order
Listening to compact discs
Program play
by remote control only
You can program up to 24 tracks.
Press B/CLEAR.
Press Hd/- or ®P4/+ to select the desired track.
Press MEMORY.
Repeat steps 2 through 3 until you have programmed
all the tracks you want.
Press */ II.
Play will start in the programmed sequence.
To cancel program play mode:
Press @/CLEAR in the stop mode.
When “- ~:-~” appears: EY
This means that the total play time of the programmed tracks has
exceeded 120 minutes. Tracks can still be programmed and played.
When “FULL” appears: El
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
To check what has been programmed:
While “Cd--P” display is on, press kid- or P>t1/+.
The programmed track numbers and the play sequence will now
appear.
The programming is cleared by opening the disc lid.
Memory retention of programmed tracks:
The programming of the tracks will be retained in the memory even if
play is stopped at any time or the power is turned off.
e During random play (page 10), you cannot skip to tracks which
have already been played out.
@ During program play or random play, you can search forward or
backward only within the current track.
è During program play, skipping is always in the programmed or-
der, whether forward or backward.
Compact disc operations FE