Panasonic RX-DS45 - Page 9

RX-DS45
Ref. No. .
Removal of the Operation P.C.B. Operation P.C.B.
Procedure
1-25-56
© PT inn ‘2
Operation P.C.B.
1. Remove 4 screws (@~@O). 3. Remove the operation P.C.B. in the direction
2. Release 2 claws in the direction of arrows @. of arrow @ @.
Procedure
1325-7
1. Remove the connector (CP1).
\ S701
8 cmso2 CM801 =
1. Release 3 connectors (CS701, CS702, CS703).
€S701 CS702 CS703 ‘ \ f- 2. Remove 4 screws (@~@).
Traverse unit
2. Remove 4 screws (Q@~O).
3. Release 6 connectors (CS701, CS702, CS703, CM801,
CM802, CM803).
Removal of the connectors (CS701, CS702, CS703).
Notes: B...Blue
O...Orange
W...White
K...Black
3. Release 2 claws in the direction of arrows @.
4. Lift up the traverse unit in the direction of arrow @.
5. Release 5 connectors (CP701, CP702, CP703, CP704,
CS705).