13
To enjoy fresher and cleaner environment
• nanoe
TM
X automatically starts when the unit is turned on.
• This operation can be activated even when the unit is OFF.
• If a power failure occurs during this operation, this operation resumes immediately when
power resumes.
Energy saving temperature setting
You may save energy when operating the unit within the recommended temperature range.
HEAT : 20 °C ~ 24 °C / 68 °F ~ 75 °F.
COOL: 26 °C ~ 28 °C / 79 °F ~ 82 °F.
Operating conditions
Use this air conditioner in the temperature range indicated in the table.
Temperature °C (°F) Indoor Outdoor
HEAT
Max. 30 (86.0) 35 (95.0)
Min. 16 (60.8) -20 (-4.0)
COOL
Max. 32 (89.6) 52 (125.6)
Min. 18 (64.4) -15 (5.0)
To Learn More...
Cleaning has to be carried out at regular intervals to ensure the unit is at optimal
performance. A dirty unit may cause malfunction. Consult an authorised dealer.
• Before cleaning, switch off the power supply and unplug the unit.
• Do not touch the aluminium fi n as the sharp parts may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use soap (
pH 7) or neutral household detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Electrical box
Air intake side duct fl ange (rear)
Air outlet side duct fl ange Water drain
Outdoor unit
Clean the debris that surround
the unit.
Clear any blockage from the
drain pipe.
Cleaning the Air Conditioner
To Next Page
Loading...
