Do you have a question about the Panasonic S-36MF1E5 and is the answer not in the manual?
Brand | Panasonic |
---|---|
Model | S-36MF1E5 |
Category | Air Conditioner |
Language | English |
Details warning symbols used in the manual to highlight potential hazards to users and the appliance.
Covers site selection, wiring, grounding, and electrical code compliance for safe installation.
Key safety points for operating the unit, including handling electrical hazards and flammable substances.
Information regarding the optional wireless remote control unit and its instruction manual.
Details about the optional timer remote control unit and its accompanying manual.
Specifies the indoor and outdoor temperature ranges for effective cooling and heating operations.
Covers setting airflow direction, activating, and stopping swing operations using the FLAP button.
Details airflow direction control specific to various unit types like cassette, ceiling, wall, and duct.
Instructions for setting airflow direction for multiple indoor units using a single wired remote control.
Covers DRY mode, heating performance, defrosting indicators, and power failure recovery procedures.
Technical specifications for 4-way cassette U1 type indoor units, including capacity and dimensions.
Technical specifications for T1 type ceiling-mounted indoor units, including capacity and dimensions.
Technical specifications for E1 type high static pressure ducted units.
Technical specifications for Y1 type 60x60 4-way cassette units.
Technical specifications for M1 type slim low static ducted units.
Technical specifications for F1 type low silhouette ducted units.
Technical specifications for L1 type 2-way cassette units.
Technical specifications for D1 type 1-way cassette units.
Technical specifications for P1 type floor standing units.
Technical specifications for R1 type concealed floor standing units.
Technical specifications for K1 type wall mounted units.
Technical specifications for ME1 series 2-way units in Standard-COP mode.
Technical specifications for ME1 series 2-way units in High-COP mode.
Technical specifications for MF1 series 3-way units.