To Next PageTo Next PageWhy is my Panasonic S-36PF2U6 making noise?
The noise could be due to several reasons: * The sound of refrigerant liquid flowing inside the unit. You might hear a streaming water sound during or after operation. * The sound of drainage water flowing through the drain pipe. This also sounds like streaming water during or after operation. * Cracking sounds may occur due to temperature changes of parts during operation or when the unit stops.
Why does my Panasonic S-36PF2U6 smell?
The odor could be due to indoor odor components, such as cigarette smoke or cosmetic odors, accumulated in the air conditioner. This causes discharged air to smell during operation. If the unit inside is dusty, consult your dealer.
What to do if my Panasonic S-36PF2U6 Air Conditioner is producing fog?
Fog may occur because the unit inside (heat exchanger) is dirty, in which case cleaning is necessary. Consult your dealer, as technical engineering is required. Fog can also occur during defrost operation, especially during cooling mode.
Why is my Panasonic S-36PF2U6 Air Conditioner fan still running after I turn it off?
The fan may continue to rotate after the operation stops to ensure smooth operation or to dry the heat exchanger due to specific settings. This is normal.
Why is my Panasonic S-36PF2U6 Air Conditioner making noise in heating mode?
Noise often occurs during defrost operation in heating mode.
Why is my Panasonic S-36PF2U6 outdoor unit fan still running after stopping it with the remote?
The fan may continue to rotate to ensure smooth operation. Check operation after stopping by remote controller; this is normal.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 36000 BTU |
| SEER Rating | 16 SEER |
| HSPF Rating | 9.0 |
| Voltage | 208/230V |
| Seasonal Energy Efficiency Ratio (SEER) | 16 SEER |
| Heating Seasonal Performance Factor (HSPF) | 9.0 |
| Power Supply | 208/230V, 1 Phase, 60Hz |
| Operating Temperature (Cooling) | 64°F to 90°F |
| Operating Temperature (Heating) | 5°F to 75°F |
Instructions for cleaning air intake, outlet, and internal components.
Diagnosing and resolving noise, odor, dewdrop, fog, and dust issues.
Resolving issues like no operation, noise, and steam in the outdoor unit.
