9
ADJUSTING AIRFLOW DIRECTION (CONTINUED)
U1 type air conditioner is equipped with auto flaps.
You can set the airflow direction to a specific angle or to the sweep mode using the remote
controller.
Do not move the flap with your hands.
4-way (U1 type) • The air outlet flap can be easily removed and washed with water.
• Be sure to always stop operation before removing the flap.
• After washing with water, allow it to dry, and then remount it with the arrow facing outward.
Concealed duct type (F1)
This air conditioner is not equipped with air outlet parts. These must be obtained locally. Please
refer to the manual of the locally adopted air outlet parts.
01_F568247_EN.fm Page 9 Thursday, November 17, 2011 8:55 PM
To Next Page
Loading...
