Panasonic S-50PY2E5A - Page 186

1-176
1
Single -Type
1-1. Unit Specifi cations
PEY1
3. Wall Mounted Type S-100PK1E5A / U-100PEY1E8
INDOOR MODEL S-100PK1E5A
PANEL MODEL -
OUTDOOR MODEL U-100PEY1E8
Branch pipe MODEL -
PERFORMANCE TEST CONDITION ISO5151 / EN14511 / EN14825 / EN12102
POWER SUPPLY
ø, Hz 1ø 50Hz 3ø 50Hz
V 220 230 240 380 400 415 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 9.0 9.0 9.0 2.7 9.7
BTU/h 30700 30700 30700 9200 33100
CURRENT A 0.61 0.59 0.55 5.40 5.15 4.95 - -
INPUT POWER
W 65 65 65 3.305k 3.305k 3.305k - -
TOTAL W - 3.370k 3.370k 3.370k 530 3.800k
ANNUAL CONSUMPTION TOTAL kWh
*
4 - - 1685 - - -
EER/EER CLASS
TOTAL(W/W)
*
5/("A"~"G") - - - 2.67 2.67 / D 2.67 5.09 2.55
Erp
*
6
Pdsign kW ----9.0-
SEER (W/W) ----5.7-
Annual consumption kWh----553-
Class ----A+-
POWER FACTOR % - - - 93 93 93 - -
NOISE INDOOR
(H/M/L)
dB-A 49/45/41 -
Power Level dB 66/60/55 -
NOISE OUTDOOR
(H/L)
dB-A 54/-
Power Level dB 70/-
H
E
A
T
I
N
G
CAPACITY
kW 9.0 9.0 9.0 2.1 10.5
BTU/h 30700 30700 30700 7200 35800
CURRENT A 0.62 0.60 0.56 3.85 3.65 3.55 - -
INPUT POWER
W 65 65 65 2.365k 2.365k 2.365k - -
TOTAL W - 2.430k 2.430k 2.430k 410 3.000k
COP/COP CLASS
TOTAL(W/W)
*
5/("A"~"G") - - - 3.70 3.70 / A 3.70 5.12 3.50
Erp
*
6
Pdsign kW ----9.0-
Tbivalen °C -----7-
SCOP (W/W) ----3.8-
Annual consumption kWh----3316 -
Class ----A-
POWER FACTOR % - - - 93 94 93 - -
NOISE INDOOR
(H/M/L)
dB-A 49/45/41 - ⁄ ⁄
Power Level dB 66/60/55 -
NOISE OUTDOOR
(H/L)
dB-A - 54/- ⁄ ⁄
Power Level dB - 70/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 0.62/65 0.60/65 0.56/65 9.0/5.510k 9.0/5.800k 9.0/6.020k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 5.40/1.7k 5.15/1.7k 4.95/1.7k⁄
NETWORK IMPEDANCE (ΩMAX.) - -
FM OUTPUT (W) 47 90 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 5.4 (11.3) -
External static pressure
Pa -
I/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 19/16.5/13 (671/583/459)
HEAT m
3
/min (ft
3
/min) 19/16.5/13 (671/583/459)
O/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 76 (2684)
HEAT m
3
/min (ft
3
/min) 67 (2366)
REFRIGERANT TYPE, AMOUNT
g
(oz) R410A 2.60k (91.7) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 300 (11-1/32) 996 (39-7/32) /
WIDTH : W mm(inch) 1065 (41-23/64) 940 (37-1/32) /
DEPTH : D mm(inch) 230 (9-1/32) 340 (13-13/32) /
P
A
C
D
I
M
HEIGHT : H mm 310 1136 /
WIDTH : W mm 1140 1055 /
DEPTH : D mm 380 485 /
MASS
(NET) k
g
(lb) 14.5 (32) 73 (161) /
(GROSS) k
g
(lb) 18 (40) 81 (179) /
LAYERS LIMIT (actually) 15 (16) 2 (3)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -10°C ~ 43°C
Heat O.D(DBT) 16°C ~ 30°C -15°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 50 (16.4 ~ 164.0) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT
g
/m (oz/ft) 50 (0.538)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 30 (98.4)
*1
:
In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2
:
If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3
:
Network Impedance shall be applicable for EUROPE and CHINA models.
*4
:
The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5
:
EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6
:
SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830231-02Single欧州.indb176SM830231-02Single欧州.indb176 2014/09/1913:21:212014/09/1913:21:21