Panasonic SC-EH60

Bottom of the tuner/amplifier
Be sure to disconnect the mains cord before adjusting the voltage
selector.
Use a minus (-) screwdriver to set the voltage selector (on the bottom
of the tuner/amplifier) to the voltage setting of the area in which the
unit will be used.
If the power supply in your area is 115 V or 120 V, please set the
voltage selector as follows:
• Forll5V: settollOV
•Forl20V; settol27V
Note that this unit will be seriously damaged if this setting is not
made correctly.
Side>by-8ide set-up IS
® CD changer (SL-EH60) or CD player {SL-EH50)
© Sound processor (SH-EH60/50)
® Cassette deck (RS-EH60)
@ Tuner/amplifier(SA-EH60/50)
Stacking Q
® Sound processor (SH-EH60/50)
® Tuner/amplifier(SA-EH60/50)
® CD changer (SL-EH60) or CD player (SL-EH50)
® Cassette deck (RS-EH60)
Placement of speakers
As well as enjoying normal stereo reproduction with the left and
right front speakers, a center speaker and surround speakers can also
be connected to the unit in order to enjoy the sound performance of
DOLBY PRO LOGIC Systems.
We recommend that surround speakers be placed on the side of or
slightly behind the listener, and about one meter higher than ear
level.
However the position should be adjusted to your personal prefer¬
ence, because the effect varies to some degree depending upon the
type of music and the music source.
® Front speaker (Left) (SB-EH60/50)
® Center speaker (SB-rc60)
© TV (not included)
® This system
® Front speaker (Right) (SB-EH60/50)
® Surround speaker (Left) (SB-PS60)
® Surround speaker (Right) (SB-PS60)
Caution
Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result In the risk of fire.
Consult a qualified service person if damage has oc¬
curred or if you experience a sudden change in perfor¬
mance.