Panasonic SC-EH60

MMqg flip Mifw
This is a 24-hour display clock.
These instructions explain how to set the timer for 16:25.
n Switch on the power.
Q ® Press CLOCKH'IMER to show “CLOCK”.
Every time you press the button, the indication changes in
the order of CLOCKS© PLAY-*© REC-*Original dis-
play.
Within 5 seconds:
(D Press SET.
H ©Press TUNING (v or a) to set the present
time on the display.
The time display can be changed in one minute units by
tapping the buttons, and quickly by holding down the
buttons.
(D Press SET.
The display will return to the previous display after about 3 sec¬
onds.
When “—:—” appears:
It appears when you connect the AC power supply cord for the first
time or if there has been a power failure.
Reset the time as explained above.
If the minutea setting is off:
1. Press CLOCK/TIMER.
2. Press SET.
3. Press TUNING(v or a) to set the minutes, and then press SET.
To display the clock again:
Press CLCX:K/TIMER.
The clock display will appear for about 5 seconds.
For your reference:
When you turn OFF the system from the POWER button, the system
goes on standby.
E)emo function while the power is on:
When the input source is set to "CD" or "TAPE", the demo
function will run automatically after about 2 minutes or more
in the stop mode.
You can cancel the demo function by pressing and holding
DISP MODE/-DEMO for about 2 seconds or more while the
automatic demo function is activated.