Panasonic SC-EH60

Always stop the changer before loading or changing CDs. You can¬
not change CDs while a disc is playing.
2 4 1
1
1
2
■
3
(03
fol~l
OPEWCLOSE
Label must
face upward.
■ mMmm
OPEN/CLOSE
Disc number
Bin-ttsi
LHoaJ' fSj I
Total playing time
a>u .mVi
Number of tracks
mibBWi
8 cm CD
8cmCD
A
12 cm CD
12cmCD
^\r
n Press DISC 1 -5, whichever you want to open.
Q Press ^ OPEN/CLOSE.
R1 Set the CD in the tray.
Q Press A OPEN/CLOSE.
The tray will close.
Q To load other CDs, repeat steps Q through Q.
About disc indicators:
The indicator lights as follows.
Green: Indicates that the tray is ready to play its CD or to be opened.
Orange: Indicates that the tray is in a status other than that described
above.
How to check which troys hove discs
A -NEXT/-AUTO is a convenient button to use for this function.
Press A -NEXT/-AUTO.
The first tray to open will be the next one after the disc number shown
on the display. For example, when disc 4 is displayed, tray 5 will
open.
•Every time you press the button, the next tray opens,
•You can change the CD while the tray is open.
•To close the tray, press A OPEN/CLOSE.
Press and hold A -NEXYZ-AUTO.
The trays will open (and close) automatically one after another. The
first tray to open will be the next one after the disc number shown on
the display. This way, you can check all trays in a row.
•To stop the auto check in course, press ■ .
Do not attempt to change CDs while trays are opening and closing in
the auto check.
To prevent damage
Always observe the following points.
• Load only 1 CD per tray. Q
•Load CDs as shown in figure @
An adapter is not needed with 8 cm CDs (singles).
•Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
•Do not move the system while trays are opening/closing, or when
loaded.
Always unload all trays before moving the system.
• Do not put anything except CDs in trays.
• Do not use cleaning CDs or CDs which are badly warped or
cracked.
•Do not use CDs with poorly attached labels or stickers. Adhesive
protruding from undemea^ stickers or left over from peeled off
stickers can cause the system to malfunction.