Panasonic SC-EH60

n Switch on the power.
Q Press A OPEN/CLOSE to open the tray.
Insert the CD with label facing upward.
Press A OPEN/CLOSE to close the tray.
When the "CD" input source is selected, total number of tracks
and total playing time will appear on the display.
When there are 16 or more tracks on the CD," will appear.
Note
The total playing lime displayed when a disc is loaded includes
intervals between tracks. This is why sometimes the displayed
time is longer than that listed on the CD.
Q Press >.
Play will start from the first track on the CD.
Play will stop automatically when the last track on the CD
finishes playing.
FI Adjust the volume level as you like.
To stop the disc play:
Press ■ .
To temporarily stop the disc play:
Press 11. The play indicator flashes green.
To play again, press >.
When "NO DISC display appears:
It indicates that a CD has not been installed.
About play Indicator:
While halted: Lights up orange.
While playing: Lights up green.
For your reference:
If you press > instead of A OPEN/CLOSE after inserting a CD, the
tray will close and play will start directly from the track 1.
To search forward/
backward
Hold down during playback.
r r ►► / ►► ! J
(Backward) (Forward)
To skip forward/
backward
Press.
(Backward) (Forward)
During random play, you cannot skip to tracks which have already
been played, (page 42)
For your reference:
•During program play or random play, you cannot search-forward/
backward over tracks, (pages 42 and 44)
•During program play, skipping is in always in the programmed
order, whether forward or backward, (page 44)
—One>touch play Q---
When the system is OFF, playing starts automaticaUy when
you press ► on the remote control.
The play will start with volume increasing gradually.