Panasonic SC-EH60

Before trying anything, have you set the center mode and adjusted
speaker output level?
When viewing a video, turn on the power supply for the TV and set
the TV to video mode.
Press INPUT SELECTOR to select the desired
external source.
Each time you press this button, sound sources will be switched
as follows.
tuner-^CD-»TAPE TUNER^CD-^TAPE
t i T I
PHONO*-VDP««-VCR^EXT VDP (AUX)*-VCR (EXT)
These indications correspond to terminals on the rear panel of
the sound processor or tuner/amplifier. Switch the displayed
indication to the source you want to use.
a Press DOLBY PRO LOGIC OFF/ON to select
ON.
C] Press MODE to select “SURROUND” or
“3 STEREO”.
FI start the desired source.
To operate external sources, refer to the operating instructions
provided with the specific unit.
When using SURROUND, use software recorded in Dolby Surround.
To turn off the DOLBY PRO LOGIC systems:
Press DOLBY PRO LOGIC OFF/ON to select "OFF".
You cannot record acoustical effects produced in the SURROUND
and 3 STEREO modes.
This function emphasizes the center position, naturally widening the
left and right, for a taste of natural stereophonic feeling regardless of
listening position.
Press 3D PRESENCE.
3D PRESENCE indicator will light.
Each time the button is pressed the display on the sound processor
changes as follows.
MODE l^MODE 2^MODE 3^0FF
t I
To cancel, press 3D PRESENCE to select OFF.
(3D PRESENCE indicator goes out.)
► The 3D PRESENCE effect cannot be recorded.
► "3D PRESENCE" is only effective on sounds which can be heard
through the speakers.
When using headphones, please switch off this function.