Panasonic SC-EH60

1
Insert the batteries in the correct polarities (©, ©).
.(@ 1 $)
R03/LR03,
AAA,UM^
To remove the batteries, pull out the © side.
Remote control signal sensor
Tuner/ampUfier
«w t» I
Battery installation
•Do not mix old and new batteries, or batteries of different types
(manganese and alkaline, etc.).
•Never subject batteries to excessive heat or flame; do not attempt to
disassemble them; and be sure they are not short'-circuited,
•If the remote control is not to be used for a long period of time,
remove the batteries and store them in a cool, dark place.
•Do not attempt to recharge alkaline or manganese batteries.
•Do not use rechargeable type batteries.
The battery life is about one year.
The batteries should be replaced if commands from the remote con¬
trol transmitter do not operate the unit even when the transmitter is
held close to the front panel.
Correct method of use
•Aim the remote control's transmission window toward the unit's
sensor. Avoid any obstacles.
•The maximum distance is within 7 meters directly facing toward
the remote control signal sensor.
•Be sure the transmission window and the unit's sensor are free from
dust. Excessive dust might affect its performance.
•This unit may not operate correctly if direct sunlight or another
strong light source strikes the receiving sensor of this unit. If there
is a problem, place the unit away from the light source.
•If this system is installed in a rack with glass doors, the glass doors'
thickness or color might make it necessary to use the remote control
a shorter distance from the system.
•Never place heavy items.
•Do not disassemble or reconstruct.
• Do not spill water or other liquids.