Panasonic SC-EH60

You can link up another CD when "LINK" flashes after editing a CD.
g Press A OPEN/CLOSE to replace the CD with
another one.
Press ^ OPEN/CLOSE again to close the tray,
g Press >.
Linking will start.
To continue linking tracks:
Repeat steps Q and Q.
As long as there is space on the tape to record, when the recording
finishes, the cassette deck will put linking on standby.
To cancel the LINK function:
Press ■ on the CD player.
I Linking programmed tracks B
(T) Perform step B above, and then press PROGRAM on the remote
control.
(D Select the track number from the remote control with the numeric
button(s).
@ Repeat step <§) until all desired tracks are programmed (max
24 tracks).
0 Press ► .Linking will begin.
•When the display shows "0:00", you cannot record from another
CD. Press ■ on the CD player.
•If the time remaining on the tape is shorter than the length of the
tracks to be recorded, you cannot record the tracks. Replace the CD
with tracks shorter than the time remaining on the tape or press ■
on the CD player.