Panasonic SC-EH60

To cancel the timer:
Press © PLAY to go out"® PLAY".
The play timer function will be canceled, but the setting stays in the
memory.
To confirm the play timer:
You can operate this even if the system is in the standby mode.
Press CLOCK/TIMER to show "0 PLAY".
The display will show ON time, OFF time, the source you select, and
the volume level alternately.
To change the play timer setting:
Follow the procedure from the first step.
Using the timer at the same time setting continuously:
You can operate this even if the system is in the standby mode.
The play timer setting will stay in the memory.
1. Press © PLAY to show "® PLAY".
2. Press POWER to switch the power to standby mode.
To enjoy the desired source after the timer setting is
completed:
1. Start playing the desired source.
Even if you change the volume level or music source, the timer
play will start with the preset condition.
2. Press POWER to standby mode after enjoying the play.
• If the power is on, the timer will not function. The system must be
in the standby mode.
•This system retains the ON/OFF time settings until you make a
new setting. If you make a new ON time setting, you must make a
new OFF time setting.
•You cannot make the ON time and OFF time the same setting.
•The play timer will function until you cancel the play timer mode.
When the display shows "© PLAY", the play timer will be acti¬
vated.
For your reference:
When you insert cassettes in both deck 1 and 2, deck 1 has priority for
timer play on tape.