Panasonic SC-HC37DB

11
RQT9640
[SC-HC37DB]
Listening to DAB+
Preparation
Make sure that the DAB antenna is connected. (> 8)
To listen to DAB+ broadcasts, the available stations
need to be memorised in this unit.
≥ This unit will automatically start the “DAB AUTO
SCAN” and memorise the stations that are available
in your region if the memory is empty.
Press [RADIO] repeatedly to select “DAB+”.

“SCAN FAILED” is displayed when the auto scan is
unsuccessful. Locate the position with the best reception
(> 12, “To verify or improve the signal reception quality”) and
then re-scan DAB+ stations.
∫ To re-scan DAB+ stations
When new stations are added or when the antenna
has been moved, reperform the auto scan.
1 Press [PLAY MENU] repeatedly to select
“AUTOSCAN” and then press [OK].
2 While “START ?” is flashing,
Press [OK].

When updating the memory with the auto scan, preset stations
will be erased. Preset them again (> right).
Preparation*
1
1 Press [RADIO] to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE” and then press [OK].
3 Press [3, 4] to select “STATION” and then press
[OK].
1 Press [RADIO] to select “DAB+”.
2 Press [:/6] or [5/9] to select the
station.
*1: The “TUNEMODE” setting is memorised until it is changed.
You can preset up to 20 DAB+ stations.
Preparation
≥ Press [RADIO] repeatedly to select “DAB+”.
1 While listening to a DAB broadcast
Press [OK].
2 Press [3, 4] to select the desired preset channel
number and then press [OK].

≥ You cannot preset stations when the station is not
broadcasting or when the secondary service is selected.
≥ The station occupying a channel is erased if another station
is preset in that channel.
∫ Listening to preset DAB+ stations
Preparation*
1
1 Press [RADIO] to select “DAB+”.
2 Press [PLAY MENU] repeatedly to select
“TUNEMODE” and then press [OK].
3 Press [3, 4] to select “PRESET” and then press
[OK].
1 Press [RADIO] to select “DAB+”.
2 Press [:/6] or [5/9] to select the
station.

≥ To select by preset, make sure that stations have already
been preset manually.
≥ To add additional preset stations, select the station using the
method mentioned in “Listening to the memorised stations”
(> left).
Some DAB+ stations provide a secondary service as
well as the primary service. If the station you are
listening to is providing secondary service, “ ” will be
displayed.
1 While “ ” is displayed.
Press [PLAY MENU] repeatedly to select “DAB
SECONDARY” and then press [OK].
2 Press [3, 4] to select the secondary service and
press [OK].

The setting will go back to primary service when changes are
made (e.g. the station is changed).
Memorising stations
Listening to the memorised
stations
Presetting DAB+ stations
Listening to the secondary
service
SC-HC37DBGN_37GN~RQT9640-1L.book Page 11 Tuesday, February 28, 2012 11:30 AM