Panasonic SC-HTB580 Quick Start Guide

RQCA2179
F1213SB0
HDMI cable is required for VIERA Link “HDAVI Control”.
Turn on the active subwoofer.
On the TV, select Home Theater System as the TV’s speakers from the VIERA Link
menu.
Press [i VOL j] on the TV’s remote control to adjust the volume.
§ Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
Turn on the main unit, active subwoofer and the TV.
Press [INPUT] to select the TV sound.
Press [i VOL j] to adjust the volume.
Quick Start Guide
Home Theater Audio System
Model No. SC-HTB580
Connections
If you have any questions, visit:
U.S.A. and Puerto Rico: www.panasonic.com/support
Canada: www.panasonic.ca/english/support
OPTICAL
OUT
TV
OPTICAL
DIGITAL
AUDIO IN
AV OUT
TV(ARC)
HDMI IN (ARC)
HDMI cable
Optical digital audio cable
≥ Not required if the HDMI terminal of the TV is labeled “HDMI (ARC)”.
TV
AC IN
AC power supply cord
(supplied)
To an AC outlet
Using this system
When the TV is VIERA Link
TM
“HDAVI Control
TM
” or
HDMI CEC compatible
≥ If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.
When the TV is not VIERA Link
TM
“HDAVI Control
TM
”
or HDMI CEC compatible
≥ If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to
the minimum.
For installation instructions and other details, refer to the Owner’s Manual.
e.g. TV remote control
INPUT
e.g. TV remote control
SC-HTB580PP_RQCA2179_mst.fm 5 ページ ２０１３年１２月１１日 水曜日 午後２時２７分

Panasonic SC-HTB580 Specifications

General

Brand	Panasonic
Model	SC-HTB580
Category	Home Cinema speakers
Language	English