EasyManua.ls Logo

Panasonic SC-HTB550 - User Manual

Panasonic SC-HTB550
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
until
2012/04/30
EG EB GN
Operating Instructions
Home Theater Audio System
Model No. SC-HTB550
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
Model number suffix “EB” denotes UK models.
RQT9666-B
SC-HTB550_RQT9660_mst.book Page 1 Monday, January 30, 2012 4:53 PM

Table of Contents

Questions and Answers

  • P
    petercampbellAug 18, 2025
    What to do if there is no sound (or image) from my Panasonic Home Cinema speakers?
    • J
      Joshua BarnesAug 18, 2025
      If your Panasonic Home Cinema speakers aren't producing any sound or displaying an image, first ensure muting is off. Verify the connections to other devices and confirm that the received audio signal is compatible with the system. Try turning the system off and on again. If connected to the TV via HDMI, ensure it's labeled 'HDMI (ARC)'; if not, use an optical digital audio cable. If connected to a Panasonic TV, turn on the main unit using the TV's remote. If issues persist, redo the connections with different cables and check the audio output settings on the connected device. If the AUX1 indicator flashes without audio, turn the connected device off and on, then power cycle the Panasonic system, removing and reconnecting the HDMI cable.
  • O
    obatesAug 20, 2025
    Why does my Panasonic Home Cinema speakers remote control not work properly?
    • E
      ernestgonzalezAug 20, 2025
      If your Panasonic Home Cinema speakers remote control isn't working, first replace the battery with a new one. Make sure to remove the insulation sheet, if it's still attached. After changing the battery, you may need to set the code of the remote control again. Finally, ensure you are using the remote control within its correct operation range.
  • K
    Kimberly SmithAug 22, 2025
    Why is VIERA Link not working on my Panasonic Home Cinema speakers?
    • D
      Drew SmithAug 22, 2025
      If VIERA Link related operations no longer function properly on your Panasonic Home Cinema speakers, check the VIERA Link setting on the connected devices. Ensure the VIERA Link settings haven't been turned off. Note that VIERA Link operations may be affected by HDMI connection changes, power failures, or AC mains lead removal. Try turning on all devices connected to the TV with an HDMI cable and then turn the TV on. Alternatively, turn off the VIERA Link settings of the TV and turn it on again. As another solution, while the system and TV are connected with HDMI, turn on the TV, remove the main unit’s AC mains lead, and reconnect it.
  • C
    Cheryl StephensAug 26, 2025
    Why does my Panasonic Home Cinema speakers switch to standby mode automatically?
    • K
      Kim KellyAug 26, 2025
      If your Panasonic Home Cinema speakers main unit is automatically switching to standby mode, the auto standby function is likely enabled. Please refer to page 27 to turn this function off.
  • S
    sbairdAug 28, 2025
    What does it mean if the wireless link indicator lights red on my Panasonic Home Cinema speakers?
    • H
      Heather GreenAug 28, 2025
      If the wireless link indicator lights red on your Panasonic Home Cinema speakers, ensure the main unit is turned on. Try turning the active subwoofer off and then back on, or turn the active subwoofer off, disconnect the AC mains lead, and then reconnect it. If the active subwoofer and the main unit may not be paired correctly, try the following operation. (Wireless pairing) 1 Turn on the main unit and active subwoofer. Press [ID SET] on the rear of the active subwoofer. Press and hold [INPUT SELECTOR] on remote control and [VOL r] on the main unit for more than 2 sec. When the wireless pairing is successful, BD/DVD indicator will stop flashing and WIRELESS LINK indicator lights green. Turn the main unit off and on. If the problem persists, consult your dealer.
  • R
    Richard MaloneAug 30, 2025
    What does it mean if the ‘TV’ indicator blinks on my Panasonic Home Cinema speakers?
    • C
      carriebrownAug 30, 2025
      If the 'TV' indicator on your Panasonic Home Cinema speakers is blinking, remove the AC mains lead and consult your dealer.
  • M
    Misty BentleySep 1, 2025
    Why is there no sound from the subwoofer of my Panasonic Home Cinema speakers?
    • Z
      Zoe TranSep 1, 2025
      If you're not getting any sound from the subwoofer of your Panasonic Home Cinema speakers, first check that the active subwoofer is turned on. Also, verify that the wireless link indicator lights green.
  • K
    Kayla BergSep 4, 2025
    Why can't I hear the first few seconds of audio on my Panasonic Home Cinema speakers?
    • K
      Kristina WilsonSep 4, 2025
      If the first few seconds of audio cannot be heard when using the HDMI connection on your Panasonic Home Cinema speakers, especially during DVD-Video chapter playback, change the digital audio output setting on the connected device from 'Bitstream' to 'PCM'.
  • W
    Wayne GarciaSep 6, 2025
    What to do if my Panasonic Home Cinema speakers subwoofer immediately turns off after turning it on?
    • S
      Stephanie HoltSep 6, 2025
      If, after turning the subwoofer on, it immediately turns off, unplug the AC mains lead and consult your dealer.
  • M
    Matthew WagnerSep 9, 2025
    Why does the power of the Panasonic Home Cinema speakers main unit turn off automatically?
    • A
      Ashley BanksSep 9, 2025
      If your Panasonic Home Cinema speakers main unit turns off automatically, it could be due to an amplifier issue, extremely high volume, or overheating. If the volume is too high, lower it. If the system is in a hot place, move it to a cooler area and try again after a few moments. If the problem persists, and the TV and AUX1 indicators blink, turn the system off, remove the AC mains lead, and consult your dealer.

Summary

Safety Precautions

Unit Safety Warnings

General safety warnings for the unit, covering fire, electric shock, and damage.

AC Mains Lead Safety

Safety warnings for the AC mains lead, including voltage and plug handling.

Button-Type Battery Safety

Safety precautions for button-type batteries regarding handling and ingestion.

Unit Cautions

Cautions for unit placement and use, including naked flames and interference.

Battery Cautions

Cautions for button-type batteries regarding explosion and misuse.

Caution for AC Mains Lead

Fuse Replacement and Wiring

Instructions for replacing fuses and wiring AC mains leads for UK/Ireland.

Step 1 Selecting the Placement Method

Wall Mounting Options

Guidance on attaching speakers horizontally or vertically to a wall.

Table Placement Options

Instructions for placing speakers on a table using stands, legs, or bases.

Speaker System Setup and Considerations

Speaker Mounting and TV Placement

Active Subwoofer Handling

Wireless Interference

Step 2 Assembling the Speakers

Horizontal Wall Mounting

Instructions for assembling speakers for horizontal wall mounting.

Vertical Wall Mounting

Instructions for assembling speakers for vertical wall mounting.

Table Placement Methods

Additional Speaker Fall Prevention Measures

Wall Mounting Fall Prevention

Table Mounting Fall Prevention

Step 3 Connections

Connection with the TV

Instructions for connecting the system to a TV via HDMI or optical cable.

Connection with Other Devices

Active Subwoofer Wireless Connection

Pairing a Device

Steps for pairing a Bluetooth device with the system for wireless connection.

Pairing Additional Devices

Using This Unit

Adjusting Volume and Sound Effects

Selecting the Source

Linked Operations with the TV (VIERA Link “HDAVI Control”)

What is VIERA Link?

Using VIERA Link Features

Advanced Operations

Auto Standby Function

Troubleshooting

Returning to Factory Preset

Procedure to reset system settings to factory defaults.

General Operation Issues

Solutions for common issues like no power or remote control malfunction.

HDMI Connection Issues

Troubleshooting HDMI connection problems and VIERA Link malfunctions.

Bluetooth Pairing Issues

Solutions for Bluetooth pairing and connection problems.

Sound Issues

Uneven Sound or No Sound

Troubleshooting tips for uneven sound or no audio output.

Dual Audio Problems

Addressing issues with changing dual audio settings.

Subwoofer No Sound

Troubleshooting no sound from the active subwoofer.

Specifications

Safety Information for Customers in the EU

Panasonic SC-HTB550 Specifications

General IconGeneral
Audio decodersDolby Digital, Dolby Pro Logic II, DTS
RMS rated power240 W
Audio output channels2.1 channels
Audio Return Channel (ARC)Yes
Impedance6 Ω
Woofer diameter65 mm
Tweeter diameter25 mm
Soundbar speaker RMS power120 W
Total Harmonic Distortion (THD)10 %
Subwoofer connectivityWireless
FM radioNo
Product colorBlack
Recommended usageHome theatre
Consumer Electronics Control (CEC)VIERA Link
Apple docking compatibilityNot supported
Soundbar dimensions (WxDxH)956 x 35 x 75 mm
Subwoofer dimensions (WxDxH)180 x 306 x 408 mm
Connectivity technologyWired
Digital audio optical in1
Power sourceAC
AC input voltage220-240 V
AC input frequency50 Hz
Power consumption (standby)0.4 W
Power consumption (typical)50 W
Weight and Dimensions IconWeight and Dimensions
Soundbar weight1540 g
Subwoofer weight5200 g

Related product manuals