RQT9666
23
Operations
Using this unit
Preparation
≥ Turn on the TV and/or connected device.
Press [Í] to turn on the main unit.
Select the source.
≥ This remote control cannot be used to control the operations
of the connected devices.
∫ When “ ” is selected as the source
On the Bluetooth
®
device:
Select this unit as the output source of the Bluetooth
®
device and start the playback.
≥ Make sure that the Bluetooth
®
device is already paired with
this unit. (> 22)
≥ Playback may pause when a different source is selected.
∫ When “BD/DVD” or “AUX1” is
selected as the source
On the connected device:
Select the TV’s input for this unit and start the playback on
the connected device.
∫ When “AUX2” is selected as the
source
On the connected device:
Select the TV’s input for the device connected to “AUX2”
terminal and start the playback on the connected device.
Adjust the volume and sound effect
level.
∫ To adjust the volume of the system
Press [i VOL j].
≥ Volume range: 1 to 100
§
∫ To adjust the dialog effect level
This setting will change the level of the Clear-
mode dialog effect. (> 24)
1 Press [i DIALOG LEVEL j] to display the
current level.
2 While the level is displayed:
Press [i DIALOG LEVEL j] to adjust the
level.
§
∫ To adjust the subwoofer level
1 Press [i SUBWOOFER j] to display the
current level.
2 While the level is displayed:
Press [i SUBWOOFER j] to adjust the
level.
§
≥ The level indication pattern is the same as dialog effect
level.
∫ To mute the sound
Press [MUTE].
≥ While muting, the audio format indicators blink
simultaneously.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is cancelled if the main unit is turned off.
§ The audio format indicators blink from left to right (i) or from right to left (s) while adjusting.
The indicators will not blink when it has reached the maximum or minimum.
≥ If there is sound coming out of the TV’s speakers, reduce the volume of the TV to its minimum.
≥ If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the
volume to the middle (50) when the main unit is turned on (Volume limitation).
To turn this function off, refer to page 27.
Press To select
[TV] “TV”
[]
“ ” (Bluetooth
®
)
[INPUT
SELECTOR]
“TV”# “BD/DVD”#“AUX1”
^---- “”(--- “AUX2”(-}
DIALOG LEVEL
LINK MODE
PAIRING
----
INPUT
SELECTOR
Indication Effect level
4 Highest
3
2
1 Lowest
If the main unit does not operate as expected or sound is unusual, return the settings to the
factory preset and operate the system again. (> 28)
SC-HTB550_RQT9660_mst.book Page 23 Monday, January 30, 2012 4:53 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
