84 VQT2A30 85VQT2A30
Others
1
Menus (cont.)
Recording and playback functions can be used and basic settings made.
(For setting procedures, see P.22.)
Settings enclosed in
are active at the time of purchase.●
SETUP menu
Item Purpose Settings/Notices Mode Page
DISPLAY
Display current information or settings on the LCD monitor.
• Even when [OFF] is set, the operating status, date, world time
and underwater mode displays remain displayed.
OFF /
ON
28
DATE/TIME Select the date and time display mode.
OFF
/ D/T / DATE
24
DATE FORMAT Select the date display format. Y/M/D / M/D/Y /
D/M/Y
24
FORMAT CARD Format SD cards. YES / NO
56
QUICK START Start recording instantly. OFF /
ON
21
ECONOMY
Turn off the unit if the unit is not being operated.
This function does not work in the following cases.
• While using the AC adaptor
• While connected to a computer or printer via USB
OFF /
5 MINUTES
: The unit turns off if the unit is not operated
for about 5 minutes. To resume the unit use,
set the mode dial to [OFF] and then the
desired mode position.
―
BEEP SOUND
Allow operations such as starting and ending recording to be
signaled by a beep.
When [ON]
Beep: • When recording starts or the unit is turned on
• When a computer or printer is recognised
Beep-Beep: • When recording stops or the unit is turned off
Beep-Beep, Beep-Beep … (4 times consecutively):
•
If an error that prevents recording occurs, etc. Check
the message (P.88) that appears on the LCD monitor.
OFF /
ON
―
POWER LCD Brighten the LCD monitor more than usual.
/ /
• [ ] is automatically selected when the AC adaptor is
used.
25
LCD SET Adjust brightness or colour density of the LCD monitor. YES / NO
25
TV ASPECT Display images at the aspect ratio of a connected TV. 4:3 /
16:9
58
EXT. DISPLAY Display information on a connected TV.
OFF /
ON
When the unit has been turned on with the mode dial set to
[
] or [ ], [ON] is set automatically.
58
RESUME PLAY Continue playback from the point it was stopped.
OFF
/ ON
52
INITIAL SET
Return all settings except for [LANGUAGE] and [CLOCK SET] to
their defaults at the time of purchase.
YES / NO
―
DEMO MODE
Display an introduction to the unit (demonstration mode).
The demonstration stops when any operation except pressing the
[AUTO] or [MANUAL AF/MF] button is performed, but it will resume
if no operations are performed for approx. 10 or more minutes.
OFF : [OFF] is normally set.
ON
: When the AC adaptor is connected without an SD
card having been inserted, the demonstration starts,
and it stops when an SD card is inserted.
―
To Next Page
Loading...
