Panasonic SL-PD347

Program Play
You can program up to 32 selections from the five discs in any order
as you desire.
1*4 3 2 6
Before beginning, follow steps 1-4 of “Basic Op
erating Procedure” on page 7.
i
2
In the stop mode, press PROGRAM MODE to
illuminate the program play indicator.
1 2 3
4
5 /
n n
PGM. . .
1
nsc
11 *-
!—< TRACK No.
Program play indicator
Press the desired disc button (1-5).
For example:
To select disc 3, press the button.
Specified disc number
1 2 «3» 4 5“
PGM. . . mac
j 01 i
1 1 L. TRACK No.
The H l indication shows that all the tracks on the disc are
selected. Skip steps 3 and 4 if you want to enter only the disc
number.
3 P ress SKIP to select the track number.
For example:
To select the 9th track, press 9 times.
Specified track number
1 2 «3> 4
5 J
o
PGM . . .
—>
DISC - 1 TRACK No.
4 P ress PROGRAM MODE.
Program order
1 2 « 3 » 4 5 in i
~i —! i
PGM . . . WSC - < TRACK No.
To enter the 9th track successively:
1. Press .
2. Press .
3. Press PROGRAM MODE at this time.
5 Repeat steps 2, 3 and 4 until you have com¬
pleted the desired entry.
• If you enter non-existing disc{s) or track(s) soon after the
loading drawer is closed or when it is open, the correspond¬
ing indicator illuminates and the entry is included in the
count. In the play mode, the changer will cancel the non¬
existing entry and play the subsequent programmed disc or
track.
• If you attempt a 33rd selection, the - f (full) indication will
be displayed.
6 Press PLAY to start play.
To enter additional selections during play, repeat steps 2, 3
and 4.
Play the changer with the loading drawer closed.
While the loading drawer is open, if next programmed selection is in
one of the other discs, the changer will stop after the current track
finishes playing.
11