Panasonic SL-PD347

Front Panel Controls and Functions
© Power “STANDBY 6/ON” switch
(POWER JL STANDBY 6 m ON)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
(2) ID scan button (ID SCAN)
Press to activate the ID (identify) scan function.
(See page 18.)
@ Disc trays (1 -5)
You can load up to five discs, one disc per one tray.
(See page 7.)
(4) Program mode button (PROGRAM MODE)
The mode changes as follows each time the button is pressed.
(See pages 11-14.)
Sequential -> Program -» Delete —
<D Search buttons ( ◄◄ SEARCH ►► )
Press to move forward or backward through the tracks on the
disc. (See page 19.)
® Skip buttons (! ◄◄ SKIP ►► !)
Use to skip to the beginning of the track. (See page 20.)
(7) Disc buttons (DISC 1 -5)
Use to select desired disc. (See pages 10,11 and 13.)
® Time mode select button (TIME MODE)
Use to select the desired time mode. Each time you press the
button, the display information will change as follows.
1. Track number and its elapsed play time of the current track.
2. Total remaining time on the disc.
3. Track number and remaining time of the current track.
4. Total elapsed play time on the disc.
(See page 21.)
Spiral button (SPIRAL)
Press to play the first tracks on all the loaded discs in se¬
quence, followed by the second tracks on all the discs, and so
on. (See page 17.)
Random mode button (RANDOM MODE)
The mode changes as follows each time the button is pressed,
(See pages 15-16.)
On© disc
C* Sequential -> _._ -» Full random —
| ^- random ■ -
Repeat button (REPEAT)
Press to repeat tracks. (See page 19.)
Loading drawer
You can load and unload discs when this drawer is open.
Stop button ( ■ STOP) (See page 9.)
Pause button (I I PAUSE) (See page 9.)
Play button ( [> PLAY) (See pages 7 and 8.)
Disc skip button (DISC SKIP)
Use to rotate the disc tray. (See pages 8 and 20.)
Loading drawer open/close button
( A OPEN/CLOSE)
5