Panasonic SL-S220

Sequential Play
Following steps 1-6.
®© Label must face upward. @ Track number in play © Elasped playing time of each track
In step 4, connect the stereo headphones/earphones to the (} jack. (Plug in firmly.)
Play stops automatically when all the tracks have been played.
èlf the unit has been connected to the car audio system, adjust the volume level between 4 and 6 on the unit, then adjust the volume
level on the system.
Press during play
To pause play
Total number of tracks
Total playing time
Press during play POWER OFF
To stop play
m Stop mode J
Press during stop mode somnos
To turn off the
unit
Press during play
Skip forward/
backward
{skip function)
$ During program play, these buttons are used to skip for-
ward or back through the programmed sequence of
tracks.
¢furing random play. the skip buttons cannot be used to
skip back to tracks that were played previously in the ran-
dam sequence.
¢During program play, random play or | track repeat play.
Rapid forward/ (Backward) (Forward) search operation is limited to the current track only.
backward
(search function)
Keep depressed during play
Backlight
The backlight comes on to illuminate the display panel when the unit is used with a AC adaptor or car adaptor.
NORMAL..
RESUME 1 4. I RANDOM
For your reference:
“na dil” indication
This indication appears for about 30 seconds if the > U8 button is
pressed when no disc is foaded in the unit or if the disc is not
completely seated,
“open” indication
This indication appears for about 10 minutes when the cover is
opened. (However, the indication does not appear when the unit
is powered off.)
Never insert foreign objects into the unit body.
Removing discs
After the disc has stopped rotating, press the PUSH button to re-
lease the disc. (To protect the disc, never open the cover while it
is playing.)
Auto power off function
If the unit is left in stop or paused status for approximately
10 minutes, the unit powers itself off automatically in order
to prevent the battery from running down.