Panasonic SL-SW960V

Listening to the Radio
Storing stations into memory
You can tune directly to a station in Free Mode by finding the station’s frequency, or you can store stations in Memory Mode to make tuning simpler.
6
5
3
2
4
1
HOLD
Release HOLD.
Press.
Press to choose the modes.
Press to change the band.
Each time you press the button;
FM
(----. AM
Press to select the station.
≥Press and hold to change rapidly.
≥“TUNED” appears when tuned.
Adjust the volume.
∫ To turn off the radio
∫
Press [∫, OPR OFF].
5
3
2
4
1
HOLD
Release HOLD.
Press to change the
band.
Each time you press the
button;
FM
(----. AM
Press to set to
Memory Mode.
5 Store stations into memory as desired.
1Press [MEMORY/RECALL].
Do each of the following within 10 seconds.
2Press [j
:
,
9
i] to select the frequency.
1
≥Press and hold [j
:
,
9
i] to change rapidly.
3Press [MEMORY/RECALL].
4Press [j
:
,
9
i] to select the memory number .
1
≥Press and hold [j
:
,
9
i] to change rapidly.
5Press [MEMORY/RECALL] to confirm the setting.
Store the frequencies of up to 30 stations; 20 FM and 10 AM.
∫
To erase unnecessary stations
Preparation: Press [TUNING MODE] to set to Memory Mode.
Press [RADIO/BAND] to select the band.
1 Press [j
:
,
9
i] to select the memory number to be
erased.
2 Press [MEMORY/RECALL].
The frequency number flashes.
Do each of the following within 10 seconds.
3 Press and hold [MEMORY/RECALL] until “- - - -” flashes.
4 Press [MEMORY/RECALL] to erase the memory number.
The next memory number appears.
Memory number
Free Mode
Memory Mode
7
Press.
FM M
0171
.
0
FM
0171
.
0
1
FM M
98 0
.
0
1
FM M
01 60
.
0
1
Memory number
FM M
0171
.
0
1
Memory number
(
➪
Storing stations
into memory)