Panasonic SX-MB100 - FM Radio Operation; Tuning and Station Selection; Volume and Auto Tuning

Antenna
Press the FM TUNER button to turn it on.
С]
ЕМ TUNER
• When this button is on, all other operations
such as keyboard performance and CD play-
back are completely disabled.
Use the FM TUNING + and - buttons to select
a station to listen to.
«Display example»
Frequency
Lights during a
stereo broadcast
ОО
Lights when a clear signal is received.
• Press the buttons only briefly to select a sta-
tion. If the buttons are pressed too long, auto
tuning will be activated.
Listen to the FM radio
Use the CD/FM TUNER VOLUME buttons to ad-
3 just the volume (0 їо 20).
авна «Display»
UP
CD/FM tuner volume
• After a few seconds, the display returns to the
previous display.
Auto tune
Press and hold the FM TUNING + or - button, and ге-
lease it when the frequency begins to change.
• The frequency automatic stops at the first station
that is received.
е If you press the button again, automatic tune stops.
* [n some cases when there is signal interference, the
signal scan may stop even though a station signal is
not being received. In this case you can intermit-
tently tap the button to select the next station.
MEMO
е When reception is poor, try to improve it by adjust-
ing the length and direction of the radio antenna.
• The radio signal is likely to be strongest if the instru-
ment is situated next to a window.
* You can store your favorite frequency settings in the
memory. (Refer to page 26.)
17
QQTG0626