Panasonic SX-MB100 - Getting Started; Connect Power and Accessories; Powering On and Volume Adjustment

Getting started
260900 NN
coooo
eoo00 о 1
Ме A: Y
[ШШШ
М
63 5
1 Connect the AC adaptor (included).
(Rear panel)
• Do not disconnect and connect the AC adap-
tor when the power button is on, as doing so
may cause the the programmed settings and
recorded contents to be deleted.
2 Affix the music stand as shown.
3 Turn the power on.
| c |
Qe
||
EH
сЕ |
$1 296)
о со
C)
24
4
4 | Press the CD & KEYBOARD button to turn it
on.
5 | Play the keyboard.
Use the KEYBOARD VOLUME controls to ad-
6 just the volume (0 to 20).
KEYBOARD
VOLUME «Display»
Keyboard volume
ue
DOWN
е After а few seconds, the display returns to the
previous display.
ə These buttons do not function when the FM
TUNER mode is selected.
ш Light Show
If the power is left on and the soundless state con-
tinues for several minutes, the panel buttons flicker in
a "light show".
To turn off the light show
The light show can be disabled with the MENU func-
tion. (Refer to pages 27, 29.)
@ Memory function
The settings of this instrument are retained as long as
the AC adaptor remains connected to an electrical out-
let.
е The unit is in the standby condition when the AC
adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an
electrical outlet.
6
QQTGO626
e When leaving the product unused for a long time,
turn off the power button of the unit and pull the AC
adaptor out of the socket for power saving.