Panasonic SY-PA100

Remove the 8 screws A. (refer to Figure-1 ).
(Step 2)
Remove the top cabinet assy. (refer to Figure-1 ).
(Step 3)
Release the 3 connectors of binding cables on each P.C.B. (refer to Figure-1 ).
Figure-1
6.2. Removing the MAIN P.C.B. and CPR P.C.B.
- Follow the item 6.1.
- Release the connectors of the P.C.B..
MAIN P.C.B.(Step 1)
Remove the 4 screws A. (refer to Figure-2 ).
(Step 2)
Remove the MAIN P.C.B..
CPR P.C.B.(Step 1)
Remove the 8 screws B. (refer to Figure-3 ).
(Step 2)
Remove the CPR P.C.B.
(Step 3)
Release the connector of the CN2.
7