First Time Setup (Continued)
Auto channel setup
_1_Select "Auto program"
(_ Select "ANT in"
FA_YTn3
Cable: Cable TV
Antenna: Antenna
_3_Select "Auto"
_ Select scanning mode (ALLchannels/Analogonly/Digitalonly)
• Press to exit from
a menu screen
EXIT
@
Start scanning the channels
® Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
_5_Confirm registered channels
_seiect "Apply"
_2)ok
® If OK is not pressed after selecting "Apply", the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the "Manual program" menu will also exit automatically.
® If you perform scanning more than twice, previously saved channels are erased.
® About broadcasting systems
Analog (NTSC): Conventional broadcasting
Digital (ATSC): New programming that allows you to view more channels
featuring high-quality video and sound
14
To Next Page
Loading...
