Panasonic TC-32LX85

At the start of the DIGA, Player theater, or RAM theater playback, the TV's input automatically switches to the input
based on the playback equipment.
® For the RAM theater, the speakers automatically switch to the theater system.
If using the DIGA operation, the TV's input automatically switches to the DIGA and DIGA menu is displayed.
When "Set" is selected (p. 25), TV is turned on automatically and switches to the appropriate HDMI input whenever
VlERA Link compatible equipment is initially turned on and Play mode is selected.
When "Set" is selected (p. 25) and the TV is turned off, all connected VtERA Link compatible equipment is also
automatically turned off.
® DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
Caution: The TV remains on even if the VlERA Link compatible equipment is turned off.
"TV" is the default setting. To set the Home Theater system as default speakers, change the default speakers
setting from "TV" to "Theater". Sound will be output from the Home Theater whenever the TV is powered on.
If the "ONE TOUCH PLAY" key is pressed on the remote control for Panasonic Home Theater system, the following
sequence of operations is performed automatically.
,_1_Home Theater power switches On, and playback begins.
_2_TV power switches On, and the playback screen is displayed.
_3pAudio is muted on the TV and switches to the theater system.
The following information about the TV settings can be transmitted to each equipment (Recorder/Home theater/
Player) that has "HDAVl Control 3" function connected to a TV with HDMI cable.
Home
Transmittable data Recorder theater Player
F%
_@On Screen Display Language setting O O O
(English/Espa5ol/Fran£ais)
_2_Panel Aspect Ratio O
(16:9 fixed)
t3j Closed caption
information
._4>"Channel
information
Mode
CC type
Digital setting
Input signal
Channel list
Caption information
0
0
0
0
0
0
o o
® There is a possibility that all the GUI language information might be set from equipment that has HDMt CEC
function connected toTV with HDMI cable. Depending on operating conditions or the specification for each piece
of equipment the setting may or may not be applied.
® For the detail on external equipment's operation, please refer to the operating manuals for the equipment.
[For Recorder]
® You cannot operate other functions while transmitting TV's information above except Power On/Off key operation.
When you turn off this unit, the transmission will be interrupted (only when you are transmitting @ Channel
information).
Minimizes lip-sync delays between the picture and audio when you connect to a Panasonic theater system or
Amplifier.
@
<
m
3>
E3
<>
C)
o
O
27