18
8.2.3. Back cover
1. Remove the 18 screws (A).
2. Remove the 15 screws (B).
3. Remove the 4 M6 CAPs.
4. Remove the Back cover.
8.2.4. P-Board
1. Remove the 5 screws.
2. Disconnect the connectors (P2 and P4).
3. Remove the P-Board.
4. Remove the Barrier P PCB.
8.2.5. A-Board
1. Remove the 2 screws.
2. Remove the metal AV bracket bottom.
3. Remove the 1 screw.
4. Remove the metal AV bracket side.
5. Remove the 3 screws.
6. Disconnect the connectors (A02, A10, A12 ,A20 ,TC01A
and TC02A).
7. Remove the A-Board.
To Next Page
Loading...
