Panasonic TC-P42S2

23
8.6. Remove the A-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Remove the screws (×2 ) and remove the A-Board.
8.7. Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Disconnect the Speaker terminal.
3. Remove the screws (×2 each) and remove the Speak-
ers (L, R).
8.8. Remove the SM-Board
1. Remove the flexible cables (SM1, SM2, SM3, SM4, SM5,
SM6, SM7 and SM8) connected to the SM-Board.
2. Remove the bridge connectors (SC41-SM41, SC42-
SM42 and SC46-SM46).
3. Remove the molding props (×4 ).
4. Remove the screws (×3 , ×4 ) and remove the SM-
Board.
8.9. Remove the SC-Board
1. Remove the SM-Board. (See section 8.8.)
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove the screws (×7 ) and remove the SC-Board.