First Time Setup
"First time setup" is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when "Auto power on" (p. 28-29) is set to "No",
Turn the TV On with the POWER button
POWER
or
(TV)
This setting will be skipped next time if you select "Home".
_1_Select your language
Be sure to select "Home"
® Please confirm your selection (Home) before pressing OK button.
• If you select "Store" by mistake in ,_2_,confirmation screen will be
displayed.
® Select "No" and return to previous screen _2).
® If you select "Yes", Screen enters store demonstration mode.
To display the "Please select your viewing environment" screen again as
shown above and select "Home", do one of the following:
• Press and hold down the front POWER button.
• Unplug the TV and plug it again.
16
• Press to exit from
a menu screen
EXIT
• Press to return
to the previous
screen
RETURN
@
To Next Page
Loading...
