Panasonic TC-P42X1

AdJustments/Configurations (alternatives)
[VIERA Link control]
Selects equipment to access and operate. (Recorder/Home theaterlPlayerlCamcorderlLUMIX) (p. 34-35)
[Speaker output]
Selects an audio output. (Home theater/TV) (p. 34-35)
÷ VIERA Link menu is accessible directly by pressing the VIERA Link button on the remote control. @ _ (p. 34)
Resets all picture adjustments to factory default settings except for "Advanced picture".
Basic picture mode (VividlStandardlCinemalGamelCustom) (p. 47)
Adjusts color, brightness, etc. for each picture mode to suit your taste
÷ Display range
Contrast/Brightness/Color/Sharpness: 0 - 100
Contrast
[B.g.t.... ][S.arp ....
Tint: -50 - +50 [Color
Selects a choice of Cool(blue), Normal, or Warm(red) color. (Cool/Normal/Warm)
Adjusts the brightness and gradation according to the ambient lighting condition. (Off/On)
Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Off/On)
Adjusts vertical alignment and size when aspect setting is "ZOOM" (p. 45)
Minimizes noise and cross-color in the picture. (On/Off)
Selects image resolution of component-connected devices (HD/SD)
÷ SD: Standard Definition HD: High Definition
÷ Only 480p signal accepted; regular TV (NTSC) is not available.
Reduces noise of specific digital signals of DVD, STB, etc. (On/OrB
Selects Dark or Light. Valid only for external input signals. (Dark/Light)
Adjust horizontal display range to reduce noise of both side edges of an image. (Size l/Size 2)
Size 2: Adjust image size according to aspect mode for reducing noise. (p. 48)
Resets Bass, Treble and Balance adjustments to factory default settings.
Increases or decreases the bass response.
Increases or decreases the treble response.
Emphasizes the left / right speaker volume.
Enhances audio response when listening to stereo. (On/Off)
Minimizes volume disparity after switching to external inputs.
Switch to "Off" when using external speakers (On/Of0
÷ "Surround" and "Volume leveler" do not work if "Off" is selected.
The default setting is "Digital" for HDMI connection. (Digital input signal)
Select audio input terminal when DVl cable is connected. (Analog audio input signal)
(Digital/Component l/Component 2/Video 1Nideo 2)
The TV can automatically turn On/Off at the designated date and time (p. 42)
Locks the channels and programs (p. 36)
Displays SD card data (p. 22-23)
[Color temp. _i
C.A.T.S.
IVideo NR
IZoom adjustments
[3D ¥/0 filter _1
nco,.... ,rix_U
MPEG NR
IBlack level _]
IBass
ISurround
ITVspeakers_l
HDMI1 in
HDMI2 in
IHDMI3 in
ISD card
@
,..., -F
"_o
E'_
Pc-
r'-
Displays subtitles (Closed Caption) (p. 40)
IClosed Caption
® In AV mode, the Audio menu and Setup menu give fewer options.
27