Panasonic TC-P46G10

19
7.8. Remove the Control button unit
1. Disconnect the connector (C24).
2. Remove the screws (×2 ).
3. Remove the Control button unit.
7.9. Remove the GK-Board
1. Remove the Control button unit. (See section 7.8.)
2. Remove the screws (×2 ).
3. Remove the GK-Board MTG. metal.
4. Remove the claw (×3 ).
5. Disconnect the connector (GK1).
6. Remove the GK-Board from Control button.
7.10. Remove the SU-Board
1. Remove the flexible cables (SU1, SU2, SU3 and SU4)
connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding prop (×1 ).
4. Remove the screws (×2 , ×2 ) and remove the SU-
Board.