Panasonic TC-P50C2 - Key Command; Service Mode

5 Service Mode
5.1. How to enter into Service Mode
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
Software version ■
Picture adjustment ----------
White balance adjustment
Option setting ----------------
Vsus adjustment -------------
Aging ----------------------------
SERVICE
ADJUST
WB-ADJ
OPTION
VSUS
AGING
SRV-TOOL
DTVSOC SOFT
*. * * * RB Cnt
DTVSOC EEP
*. **. * * * *
LSI DATA
*. **, **
ST BY SOFT
ST BY EEP
**. ** .* * * *
PDP SOFT
до ^
PDP EEP
э|сз|с
PDPFPGA
PDPPDROM
3|(3fC
EPOP
I Sub Item
| 1
'ADJUST' i '
'CONTRAST' '0000'
YMAX
5.1.1. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
9