Panasonic TC-P50S60

Slide 74
To copy the data from the USB Drive to the TV:
1. Turn on the TV.
2. Insert the USB Drive with the copied data into the USB connector.
3.Using the Remote Control, enter the appropriated password when the “Input Password” Menu appears.
• For Board replacement :2771 (The data on the USB Drive is deleted after it has been copied to the TV)
• For Hotel : 4851 (The data will not be deleted and it can be used for other TVs)
The data will be copied from the USB Drive to the TV.
4. Remove the USB Drive from the TV.
5. Turn off the TV set.
Note:
1. Depending on the A board’s failure, the data copy procedure may not work after replacing the board.
2. Data should only be copied to TVs with the same model number.
Detailed Procedure to Copy Data From USB Drive to The TV
Slide 74
Enter 2771 if the “A” board is replaced.
Enter 4851 if copying Hotel data.
Enter 2771 if the “A” board is replaced.
Enter 4851 if copying Hotel data.