Slide 73
A new folder with data from the TV will be created in the USB Drive.
(a) For Board replacement : user_setup
(b) For Hotel : hotel
Detailed Procedure to Copy the TV’s Data into a USB Drive (2 of 2)
Slide 73
1 - Turn on the TV
2 – Connect the USB Drive to the USB connector.
The .pwd file on the card will be recognized by the TV when the USB Drive is connected to the TV.
3 - Enter the password when the “Input Password” screen appears.
- Enter 2770 for “Board Replacement”
- Enter 4850 for Hotel
A Board
A bd Replacement
2770
Hotel Data
4850
TV
A
Transferring data from
the TV to the USB Drive
Transferring data from
the TV to the USB Drive
Finish
Finish
Password
Enter 2770 if the “A” board is replaced.
Enter 4850 if copying Hotel data.
Enter 2770 if the “A” board is replaced.
Enter 4850 if copying Hotel data.
The data will be copied from the TV set to the USB Drive. This might take approx. 2 to 6 minutes.
Remove the USB Drive from the TV and turn off the TV.
To Next Page
Loading...
