Insert it firmly until the Keep pushing both
tabs on both sides click sides until they snap
into place, and pull.
Hook
Open
÷
Note the correct polarity
(+ or -).
(- Caution -)
Close ® incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
*_,Do not mix old and new batteries.
** Do not mix different battery types (such
as alkaline and manganese batteries).
** Do not use rechargeable (Ni-Cd)
batteries.
#_ Do not burn or break batteries.
Be sure to attach the provided ferrite core to the HDMI cable (not supplied) to reduce interference or
electrical noise.
Attach the ferrite core as close as possible to connector on the TV side as shown.
Close the ferrite core until it clicks.
10
To Next Page
Loading...
