Need help?Do you have a question about the Panasonic TC-P54G10 and is the answer not in the manual?
General| Display technology | Plasma |
|---|
Guidelines for conducting repairs and servicing, including modifications, wiring, connectors, and lead dress.
Procedures for checking leakage current (cold and hot) to prevent shock hazards.
Techniques to reduce component damage from static electricity, including handling and soldering ES devices.
Hints for servicing, including removing the rear cover and identifying board names and functions.
List of applicable input signals for Component, HDMI, and PC, with horizontal and vertical frequencies.
Instructions on how to enter service mode using the main unit and remote control buttons.
Explanation of key commands for navigating main items, sub items, and adjusting values in service mode.
Steps to access the service tool mode by selecting [SRV-TOOL] and pressing [OK] on the remote.
Instructions to access the Hotel mode setup menu using specific button commands on the TV and remote.
How to access and interpret the self-check indication for IIC bus lines and related check points.
Illustrates the screen display for the IIC bus line check, showing status of various components.
Procedure for removing the P-Board, including cautions and steps for disconnecting cables and screws.
Steps to remove the A-Board after removing the tuner unit, clampers, and screws.
Steps to remove the plasma panel section from the cabinet assembly, including front frame removal.
Procedure for driver setup, including item preparation and voltage adjustments using a multimeter.
Overall block diagram of the TV system, showing interconnected major components and signal flow.
To Next Page
