Panasonic TH-32LRU60 - Page 8

8
Accessories
Bracket (1)
TBL5ZA34841 (for 32”)
TBL5ZA34831 (for 39”)
TBL5ZA34811 (for 42”)
TBL5ZA34801 (for 50”)
TBL5ZA34611 (for 65”)
Base (1)
TBL5ZX07281 (for 32”)
TBL5ZX07321 (for 39”/42”)
TBL5ZX07381 (for 50”)
TBL5ZX07161 (for 65”)
Neck cover (1)
TBL2AB30081
(for 32”/39”/42”)
Assembly screws
Screws (4) Screws (4) Security screw (1) Security screw (1)
XYN4+F12FJK
size (M4 × 12)
(for
32”/39”/42”/50”)
XYN4+F25FNK
size (M4 × 25)
(for 65”)
XSS5+12FNK
size (M5 × 12)
(for 32”/39”/42”)
XSS5+15FNK
size (M5 × 15)
(for 50”/65”)
THE2AC004J
size (M4 × 12)
(for 32”/39”/42”/50”)
THM2AA001N
size (M5 × 12)
(for 32”)
Screw (1) Screws (2) Screw (1) Security screw (1) Wood screws (4)
THEC1509
size (M3 × 5)
(for 32”/39”/42”)
XVE6A10FJK
size (M6 × 10)
(for 32”/39”/42”)
XTB3+30AFJK
size (M3 × 30)
(for 32”/39”/42”/50”)
THT2AA002J
size (M3 × 30)
(for 32”/39”/42”/50”)
XTS5+20AFJK
(for 32”/39”/42”/50”)
■
Assembling the pedestal
(1) Install securely with assembly screws . (Total 4 screws)
(2) The rotation angle can be set at 0°, 30°, 60° or 90°. Install
screws to each angle control position.
It is not necessary to install
screws if 90° angle rotation is desired.
Tighten screws firmly.
For TH-50LRU60/TH-65LRU60, only (1) is needed in “Assembling the pedestal”.
0°
30°
60°
B
B
F
F
For TH-32LRU60/TH-32LRU6, one of the screws
can be replaced with a security screw if
necessary.
(3) Install neck cover.
(4) Install securely with an assembly screw .
Tighten screws firmly.
E