LED does not turn to red in Standby mode
●
LED turns to orange in Standby mode in the following conditions:
– Recording is in progress
– Timer Programming is set.
– DLNA Server is set to On.
– Powered On by Apps is set to On.
– Home Streaming is set to Always.
– TV Anytime is set to On.
– Powered On by Easy Mirroring is set to On.
When pushed with a finger, the display panel moves slightly and makes a
noise
●
There is a little gap around the panel to prevent damage to the panel. This
is not a malfunction.
- 285 -
To Next Page
Loading...
