Panasonic TH-42LRU70 - Page 8

8
■
Assembling the pedestal
(For TH-32LRU70/TH-32LRU7)
(1) Install securely with assembly screws . (Total 4 screws)
(2) The rotation angle can be set at 0°, 30°, 60° or 90°. Install
or screws to each angle control position.
It is not necessary to install screws if 90°angle rotation is desired.
Tighten screws firmly.
30°
60° 60°
E
G
H
E
G
0°
From above
From
below
(For TH-42LRU70/TH-50LRU70/TH-42LRU7)
(1) Install securely with assembly screws (Total 4 screws) and screws (Total 4 screws).
(2) The rotation angle can be set at 0°, 30°, 60° or 90°. Install
screws to each angle control position.
It is not necessary to install
screws if 90° angle rotation is desired.
Tighten screws firmly.
G
D
B
D
1
2
G
From above
Accessories
Bracket
TBL2AB30141 (1)
(for 32”)
TBL5ZA35091 (2)
(for 42”/50”)
Base (1)
TBL2AX00551
(for 32”/42”/50”)
Neck cover (1)
TBL2AA30301
(for 32”/42”/50”)
Arm (1)
TBL2AA30321
(for 42”/50”)
Assembly screws
Screws (4) Screws (4) Security screw (1) Screws (4) Screws (4)
XYN4+F15FNK
size (M4 × 15)
(for 32”)
THE5ZL002N
size (M4 × 12)
(for 42”/50”)
XSS5+15FNK
size (M5 × 15)
(for 42”/50”)
THEL124J
size (M4 × 15)
(for 32”)
THE2AC004J
size (M4 × 12)
(for 42”/50”)
XSS5+10FNK
size (M5 × 10)
(for 42”/50”)
XSN5+12FJK
size (M5 × 12)
(for 32”)
Screw (1)
Screws (2) Screws (2)
Screw (1) Security screw (1)
Wood screws (4)
XTB3+6JFJK
size (M3 × 6)
(for 32”/42”/50”)
XVE6A16FJK
size (M6 × 16)
(for 32”/42”/50”)
XVE6A8FJK
size (M6 × 8)
(for 32”)
XTB3+30AFJK
size (M3 × 30)
(for 32”/42”/50”)
THT2AA002J
size (M3 × 30)
(for 32”/42”/50”)
XTS5+20AFJK
(for 32”/42”/50”)