9
CH12
EXIT : To exit
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
02 78:01 41
Green
Red
TV
123
456
789
C
0
OK
N
SuchlaufStart ATP Abbruch
Land
TV
OK
123
456
789
C
0
N
N
Quick Start Guide
Select your country.
For Belgium, Switzerland and E.Eu,
select the desired language.
If you wish to perform manual tuning,
press the Green button.
See page 19.
Press the Red button to start Auto
Setup.
Auto setup will begin, your stations will
be located and stored.
If a compatible recording device is
connected to the correct Scart terminal,
programme data will be downloaded
to the device via Q-Link.
See page 20.
Once Auto setup is complete, if you are installing a new Q-Link compatible recording device, you can now
switch it On. Downloaded tuning data will match the television’s. Not all devices support this download of
programme information, some may require to be started manually. See the device’s instruction book for details.
• If the recording device has not accepted download data from the TV, you may need to select the download
option from the device’s menu.
• If Q-Link is not operating correctly, check it is connected to the TV’s correct Scart terminal, the Scart cable
is a “full function” type, and the device is compatible with Q-Link, NEXTVIEWLINK or similar technologies.
Ask your dealer for further details.
• For further information on Q-Link and connecting equipment. See page 20, 37.
5
6
We recommend that as soon as the Auto setup feature is completed, the picture
controls are reset to normal viewing levels. To do this, press the N button.
4
To Next Page
Loading...
