•
Turn Off the
TV speakers.
(p. 16 “Speakers”)
■
To watch digital video image
S-Video signals have priority
■
To listen to the TV through
speakers
Amplifier
DVD Player or Set Top Box
(HDMI compatible machines only)
or
■
To record TV
shows
DVD Recorder /
VCR
Recommended AV Connections
These diagrams show our recommendations for how to connect the TV unit to your various equipment.
For other connections, consult the instructions of each equipment, and the specifications (p. 42).
For additional assistance, please visit our website at www.panasonic.com
■
To watch DVDs
DVD Player
Set Top Box
Caution
•
For Antenna connection via VCR, please refer to the Operating Instructions of a VCR.
Cable TV
Cable Box
HDMI
cable
HDMI-DVI
conversion
cable
Audio cable
or
■
Recommended HDMI Connections (p. 20-21)
•
For receiving digital
broadcasting of cable
TV, connect Cable
TV directly to “ANT”
terminal.
or
AC Cord
(Connect after all the
other connections are
complete.)
Back of the unit
•
Digital audio amplifier
• Theater system
Note
•
The picture and audio input signals
connected to a terminal specified in “Prog-
out stop” (p. 16) cannot be output from
“OUTPUT” terminals. However, audio
output can be obtained from the optical
Digital Audio Out terminal.
•
To prevent howling and image oscillation, set
the “Prog-out-stop” setting when connecting
VCR with loop-connection. (p. 16)
•
When a device (STB, DVD, etc.) is
connected to the HDMI or COMPONENT
terminals, only audio signals will be
output. No video signals will be output.
or
or
To Next Page
Loading...
