Panasonic TH-L42E5A

TH-L42E5A
29
8 Measurements and Adjustments
8.1. Voltage chart of A-board
Set A-Board to a dummy set and check the satisfaction with the specified voltage as following table.
8.2. Voltage chart of P-board
Set P-Board to a dummy load and check the satisfaction with the specified voltage as following table.
Power Supply Name Measurement Point Specification
SUB1.1V TP8100 1.10V - 1.22V
SUB1.5V TP8101 1.435V - 1.585V
SUB1.8V TP8700 1.7V -1.9V
SUB3.3V TP5400 3.17V - 3.43V
SUB5V TP5420 4.95V - 5.65V
USB5V TP5440 4.80V - 5.25V
PNL12V TP4004 or TP4005 11.45V ± 12.55V
Voltage Test Point Step 1 Step 2
24V (PANEL) TP7512 or TP7513 < 1V 24V ± 1.2V
16V TP7508 or TP7514 < 1V 16.1V ± 0.6V
5VS TP7412 or TP7507 5.3V ± 0.1V 5.3V ± 0.1V
PFC TP7201 or TP7202 < 340V 390V ± 15V * HOT