15
Getting StartedUseful InformationTroubleshootingAppendix
A Click (Start) - [Control Panel] - [Additional Options] - [Tablet Calibration].
B If [User Account Control] is displayed, click [Continue], or input password and
click [OK].
C Touch each “+” using the stylus.
“+” is displayed in order at 9 locations.
NOTE
PC Information Viewer
This computer periodically records the management information including the hard disk information such as number
of hours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data
volume for each record is 750 byte. These information are only used for estimating the cause when the hard disk
goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for
the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information
history] in [Hard Disk Status] of PC Information Viewer, and click [OK].
( Reference Manual “Check the Computer’s Usage Status”)
When Starting Up/Shutting Down
CAUTION
Do not do the following
• Connecting or disconnecting the AC adaptor
• Sliding the power switch
• Touching the keyboard, touch pad, touchscreen or external mouse
• Closing the display
NOTE
When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. About 1.5 W
of power is consumed simply by having the AC adaptor plugged into an electrical outlet.
Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully
charged, the battery will fully discharge in the following period of time:
• When power is off: Approx. 3 months
• In sleep: Approx. 8 days
• In hibernation: Approx. 15 days
If “Wake up from LAN” is disabled, the period of time in sleep will become slightly longer, and the period of time in
hibernation will become about the same as that in power-off.
To change the partition structure
You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new parti-
tion. This computer has a single partition in the default setting.
A Click (Start) and right-click [Computer], then click [Manage].
A standard user needs to enter an administrator password.
B Click [Disk Management].
C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].
The partition size depends on the computer specifications.
D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].
You cannot input a larger number than the displayed size.
E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].
F Follow the on-screen instructions to make the settings, and click [Finish].
Wait until formatting is completed.
NOTE
You can create an additional partition using remaining unallocated space or newly creating unallocated space.
To delete a partition, right-click the partition and click [Delete Volume] in the step C.
6 Perform the touchscreen calibration.
To Next Page
Loading...
