18
First-time Operation
Getting StartedUseful InformationTroubleshootingAppendix
The hand strap is convenient for computing while standing.
To carry the computer, put your hand between the computer and the
hand strap to prevent it from falling, and firmly hold the computer
when using it.
You can adjust the length of the hand strap by the following steps.
1 Peel back the tape (A) on the hand strap.
2 Adjust the length of the band.
3 Close the tape on the hand strap firmly.
At the time of purchase, the stylus (included) is not attached to the stylus
holder (A).
The tether prevents the stylus from falling accidentally. It can be attached to
the stylus holder.
Perform the following steps before using the stylus.
1 Attach the tether to
the stylus.
Using the Hand Strap
Before Using the Stylus
Tether
Stylus
AB
To Next Page
Loading...
