Panasonic TX-29P180T User Manual

Power Source AC Auto 110-240 V, 50/60 Hz
Power Consumption 197 W
Standby condition: 11 W
Receiving System
Function 21 Systems
Reception of broadcast PAL B, G, H
transmissions and Playback PAL I
from Video Cassette Tape PAL D, K
Recorders SECAM B, G
SECAM D, K
SECAM K1
NTSC M (NTSC 3.58/4.5 MHz
Playback from special NTSC 4.43/5.5 MHz
VCRs NTSC 4.43/6.0 MHz
NTSC 4.43/6.5 MHz
NTSC 3.58/5.5 MHz
NTSC 3.58/6.0 MHz
NTSC 3.58/6.5 MHz)
SECAM I
Playback from Special Disc PAL 60 Hz/5.5 MHz
Players and Special VCRs PAL 60 Hz/6.0 MHz
PAL 60 Hz/6.5 MHz
SECAM 60 Hz/5.5 MHz
SECAM 60 Hz/6.0 MHz
SECAM 60 Hz/6.5 MHz
NTSC 50 Hz/4.5 MHz
© 2003 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
TX-29P180T
MD3N Chassis
Receiving Channels Regular TV
VHF BAND 2-12 (PAL/SECAM B, K1)
0-12 (PAL B AUST.)
1-9 (PAL B N.Z.)
1-12 (PAL/SECAM D)
1-12 (NTSC M Japan)
2-13 (NTSC M U.S.A.)
UHF BAND 21-69 (PAL G,H,I/SECAM G,K,K1)
28-69 (PAL B AUST.)
13-57 (PAL D,K)
13-62 (NTSC M Japan)
14-69 (NTSC M U.S.A.)
CATV S1-S20 (OSCAR)
1-125 (U.S.A. CATV)
C13-C49 (JAPAN)
S21-S41 (HYPER)
Z1-Z37 (CHINA)
5A, 9A (AUST.)
Receiving Stereo System NICAM I, NICAM B/G, NICAM D, A2
(German)
Tuning System Frequency synthesizer
Auto Search Tuning
POSITION: 100 Position
DIRECT: 125 Position
High Voltage 31.0 ± 1.0 kV at zero beam current
Picture Tube Overall Picture tube measured
Colour Television
Specifications
Order No. MTV0308225C3

Panasonic TX-29P180T Specifications

General

Brand	Panasonic
Model	TX-29P180T
Category	TV
Language	English

Summary

Safety Precautions

General Guide

General safety advice for servicing the television.

Leakage Current Cold Check

Procedure to check leakage current when the TV is cold.

Leakage Current Hot Check

Procedure to check leakage current when the TV is hot.

X-Radiation Precautions

Information and precautions regarding X-radiation in TV sets.

Service Hints

Rear Cover Removal

Steps to safely remove the rear cover of the television.

Chassis Service Position

Instructions on how to move the chassis into a service position.

Hotel Mode Function

Functionality and purpose of the hotel mode to prevent user changes.

Self Check Function

Service Mode Operations

Enter Service Mode 1

Procedure to access Service Mode 1 for adjustments.

Enter Service Mode 2

Procedure to access Service Mode 2 for adjustments.

Adjustment Procedures

Voltage Confirmation

Verifying critical voltage levels within specified ranges.

EHT Check

Procedure to check Extra High Tension (EHT) voltage.

Sub Contrast Adjustment

Adjusting sub-contrast for optimal picture quality.

Sub Tint Adjustment

Adjusting sub-tint for accurate color balance.

Sub Colour Adjustment

Adjusting sub-colour saturation for picture accuracy.

VRS Adjustment

Vertical Raster Scan (VRS) adjustment for picture geometry.

Colour Purity Adjustment

Adjusting color purity for accurate color reproduction.

Convergence Adjustment

Adjusting beam convergence for a sharp picture.

Cut Off Adjustment

Adjusting picture cut-off for greyscale tracking.

White Balance Adjustment

Adjusting white balance for accurate color representation.

Focus Adjustment

Adjusting picture focus for sharpness.

Geomagnetic Adjustment

Adjusting for geomagnetic field interference.

Sub Bright Adjustment

Adjusting sub-brightness for picture contrast.

Deflection Adjustments

Vertical Deflection Adjustments (4:3)

Adjustments for vertical position, height, and linearity in 4:3 mode.

Horizontal Deflection Adjustments (4:3)

Adjustments for horizontal center, width, and EW in 4:3 mode.

EW and Pincushion Adjustments (4:3)

EW and pincushion adjustments for various modes in 4:3.

16:9 Mode Deflection Adjustments

Adjustments for 16:9 aspect ratio including data settings and V-AMP.

Standard Deflection Adjustments (525p/625p)

Adjustments for 525p and 625p signals, including hold and center.

VGA Deflection Adjustments

Adjustments for VGA video inputs (480/60Hz, 400/70Hz).

Deflection Adjustment Data Table

Reference table for deflection adjustment parameters across modes.

Schematic Diagrams Overview

Schematic Diagram Notes

Explanations of symbols and notations used in diagrams.

Board Schematics

G Board Schematics

Circuit diagrams for the G Board.

X Board Schematics

Circuit diagrams for the X Board.

DG Board Schematics

Circuit diagrams for the DG Board.

DG2 Board Schematics

Circuit diagrams for the DG2 Board.

L Board Schematics

Circuit diagrams for the L Board.

P Board Schematics

Circuit diagrams for the P Board.

H Board Schematics

Circuit diagrams for the H Board.

A Board Schematics

Circuit diagrams for the A Board.

Parts Location Guide

Replacement Parts List

Replacement Parts List Notes

Notes and abbreviations for the parts list.

Component Part Numbers

Detailed list of replacement parts and their numbers.