Need help?Do you have a question about the Panasonic TX-40ESR500 and is the answer not in the manual?
General| Display Type | LED |
|---|---|
| Smart TV | Yes |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Audio Output | 20W |
| HDR Support | Yes |
| Ethernet Port | Yes |
| Wi-Fi | Yes |
| Refresh Rate | 50 Hz |
| Bluetooth | No |
| Energy Efficiency Class | A |
| Screen Size | 40 inches |
| Weight | 8.5 kg |
Crucial warnings and safety precautions for servicing the unit.
Basic rules for safe and correct service procedures.
Procedures for performing cold and hot leakage current tests.
Methods to prevent damage to ES devices from static electricity.
Details on the properties and handling of lead-free solder.
Visual guide to identify main circuit boards within the TV.
How to access, navigate, and exit the CS Maintenance Menu.
Steps for the repack function within the CS Maintenance Menu.
Accessing and adjusting EDID Clock parameters.
Performing a check on connected USB Hard Disk Drives.
Procedure for adjusting the white balance of the display.
Steps to view the TV's system information.
Instructions on how to leave the System Information screen.
Purpose and command sequence to enter the Hotel mode menu.
Procedure for exiting the Hotel mode setup menu.
Details on the functions and settings available in the Hotel mode.
Explanation of data backup/restore for board replacement and hotel setup.
Steps to prepare the USB drive for data copying.
Step-by-step guide for copying TV data to a USB drive.
Step-by-step guide for copying data from USB to the TV.
How to initiate the IIC bus line self-check.
Example output of the IIC bus self-check.
Specific checks for IIC bus errors.
How to exit the IIC bus check mode.
Interpretation of power LED blinking patterns for error diagnosis.
Procedure to enter and use the LCD panel test mode.
Instructions and diagrams for removing and re-inserting screws.
Instructions for handling protection film and blue tape.
Diagrams showing the correct placement of felt pads.
Sequence for assembling various metal components.
Step-by-step guide for screw assembly.
Diagram illustrating the cabinet assembly process.
Diagrams showing the set assembly process.
Diagram for the speaker assembly.
Diagram for the first part of the back cover assembly.
Diagram for the second part of the back cover assembly.
Diagram for the third part of the back cover assembly.
Diagram for the fourth part of the back cover assembly.
Guidelines for safely moving the LCD module.
Instructions for moving the TV unit with its stand.
Table of specified voltages for test points on the A-board.
Table of specified voltages for test points on the P-board.
Overall system block diagram illustrating component interconnections.
Diagrams showing how wires are routed and connected.
Illustrated view showing the location of major TV components.
Diagram showing the first set of items in the packing.
Diagram showing the second set of items in the packing.
To Next Page