●
Is Luminance Level, Contrast, Brightness or Colour in the Picture Menu
set to the minimum?
Watching > For best picture > Basic settings
●
Check all required cables and connections are firmly in place.
Blurry or distorted image (no sound or low volume)
●
Reset channels.
Watching > Tuning and editing channels > Auto Setup
There may be a short black image
●
A black image is displayed to avoid picture distortion when an input signal
changes.
There may be white, red, blue, green and black spots on the screen
●
This is a characteristic of the panels and is not a problem. The panel is
built with very high precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed
point of white, red, green, blue or black. Please note this does not affect
the performance of the panel.
A white horizontal line appears in Standby mode
●
A white horizontal line may appear on the screen for a while to adjust the
panel. This is not a malfunction.
- 340 -
To Next Page
Loading...
